PARALLEL STRAIGHT EDGES | MASTER
PARALLEL STRAIGHT EDGES | MASTER SQUARE
Aluminum Straight Edges are made
in the same sizes as most cost iron straight edges.
Starting with a cast aluminum alloy body, this series is specially treated for stress-relief and stability.
After premachining, the top and bottom faces are fitted with cast iron wear plates which are then bonded to the aluminum body with superstrong space-age adhesive.
At less than half the weight of cast iron, these aluminum straight edges combine light weight convenience with the wear qualities of cast iron.
Available in 10 sizes with precision ground or hand scraped finishes with faces parallel and straight within the tolerances indicated.
|Part Number||Nominal Dimensions - Inches||Accuracy||Approx. Weight Lbs.|
While identical in size to its cast iron counterpart, the Aluminum Master Square is made with a cast aluminum alley body and banded cast iron wear plates on the faces.
By combining the wear qualities of cast iron with cast aluminum alloy, the Aluminum Master Square provides precision accuracy with convenient handling and is available in both precision ground and hand scraped finishes.
For storage and transport, a specially fitted, cushioned case can be provided at additional cost.
|Part Number||Nominal Dimensions - Inches||
|Approx. Weight Lbs.|
link to Busch index page