link to Home Page Logo, Link to Home Page
  Newman Tools Inc.     Tel 1-800-465-1384       Fax 1-800-605-2442
...IN STOCK...

vast selection, over 30,000 different items including "hard-to-find/special sizes"

Panel Tachometer DT-5TG

 

horz. bar


Multi-Purpose
PANEL
TACHOMETER



DT-5TG

Accurately display RPM, surface speed, flow or production data scaled to any engineering units.

An additional mode displays the elapsed time required to travel a fixed distance at a pre-selected speed for baking and similar conveyor applications.

One or two Plug-In Modules can be added to enhance the DT-5TG capabilities to meet your application requirements.

User-set Hi and Lo limits, display update rate decimal point

Set-up data is easily entered via front panel keys and is not lost during power failures

Snap-in installation without tools, brackets or screws

Provides 12 V DC to power an external sensor


Plug-In Modules
1. ANALOG OUTPUT
for recording and data acquisition
Provides 0-10 V DC or 4-20 mA output proportional to the input frequency. A 12-bit D/A converter is used. Module...FV
2. RELAY CONTACT
for alarms and control systems
Provides 3 separate SPST relay contacts working in conjunction with the HI, GO & LO LED's on the front panel. Module...CP
3. RS-232 OUTPUT
for data monitoring systems
Provides an RS-232C serial output to transmit data to a computer. An MTI output is also provided to connect to Mititoyo devices. Module...SD
4. RATIO METERING Converts DT-5TG into a ratio meter by measuring and displaying in percent the absolute ratio of inputs "A" & "B" as expressed by A/B, B/A-1 or B-A. Module...RM
5. PRINTER OUTPUT Provides standard parallel printer output to obtain a hard copy of data. Module...PO
6. BCD OUTPUT Provides a TTL compatible BCD output signal. Module...BC


Panel Tachs
Model Description
DT-5TG-0 Panel Tach Without module connectors
DT-5TG-1 Panel Tach with 1 connector for 1 module
DT-5TG-2 Panel Tach with 2 connectors for 1 or 2 modules

 

Plug-In Modules
Model P/N   Module P/N Note: Any combination of two modules can
be used with DT-5TG-2 except FV & RM.
Analog Outputs FV Ratio Metering RM
Relay Contacts CP Printer Output PO
RS-232 Output SD BCD Output BC


Technical Data & Specifications
Operating Mode Rate Measurement Elapse Time Counter
Display Selections: 0-9.9999 99.99 seconds
0-99.999 99 minutes 59 seconds
0-999.99 99 hours 59 minutes
0-9,999.9
0-99,999
Measuring Range: 10-99,999 rpm (@ 1 pulse per rev.)
0.2-30,000 rpm (@ 60 pulses per rev.)
Display: 5-digit LED, 0.56" (14.2 mm) high
Accuracy: ± 0.008% or ± 1 digit
Number of PPR: 1-9,999 pulses/rev (selectable)
Input Signal Maximum Frequency: Sine wave: 10kHz
Square wave: 30kHz
Open Collector: 30kHz
Contact closure: 20Hz
Input Signal Amplitude: Sine wave: 0.3-30 V P-P
Square wave: LO: 0-1.5 V, HI: 4-30 V
Input Impedance: 10 k-Ohms for magnetic pickup, rotary pulse generator and proximity switch
Voltage Output 12 V DC ±5% (50 mA max.) to power sensors
Applicable Sensors: Rotary pulse generator, magnetic pickup, proximity switch, retro-reflective optical
Ambient Temperature: 32º - 113º F (0-45º C)
Power Consumption: 1 W (5 W when optional modules are used)
Voltage Requirement: 85-265 V AC, 50/60Hz (optionally available for 9-35 V DC)
Dimensions: 3.46" L x 1.88" H x 3.78" D (8 L x 48 H x 96 D mm) includes bezel and fits 1/8 DIN cutout
Weight: 0.55 lbs. (250 g)

Specifications subject to change without notice
.

Sensors and Pickups
Sensors and Pickups lm.jpg (1074 bytes) m_m.gif (351 bytes) rm.jpg (1183 bytes)
b_m.gif (355 bytes)
 
 


Back to Top of Page

horz. bar

 link to product table of contents       link to what's "NEW"        link to price list




Newman Tools Logo




Newman Tools Inc.
185 Iber Road
Stittsville, Ottawa, Ontario, Canada K2S 1E7
Phone: 1-613-836- 6776 or 1-800-465-1384
Fax: 1-613 -836 -9070 or 1-800-605-2442
 
 

Newman Tools Inc.
151 New Park Avenue
Hartford, CT 06106, USA
Phone: 1-800-465-1384
Fax: 1-800-605-2442


Email:     info@newmantools.com

Please send comments, questions, email to   tom@newmantools.com    ( this email will be returned advising you to resend the email to the following email address )

spamfilter1 "at" newmantools "dot" com. This notation is to prevent the robots from harvesting this email address.

return to Newman Tools Home Page.


Go to ... Home Page  | Brand Name index  | Product list  | Technical info  | Price list  | Monthly specials $$$$  | Jokes  | Latest page additions  | Contact Information  | Email the Boss
Servicing the Canadian provinces of Newfoundland, Nova Scotia, New Brunswick, Prince Edward Island, Quebec, Ontario, Manitoba, Saskatchewan, Alberta ,British Columbia and the states of Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin,Wyoming




Newman Tools Inc.

March 1999, November 2008