Cold Surface Paintstik® Markers
series | application |
B | MARKS ON ANY MATERIAL, SURFACE OR TEXTURE| |
B-E | FOR MARKING VERY ROUGH SURFACES |
BL | BLEEDS THROUGH SOLVENT-BASED PAINTS |
BL-W | BLEEDS THROUGH WATER-BASED PAINTS |
C | FOR MARKING ON SMOOTH SURFACES |
E | FOR HIGH VISIBILITY MARKS |
F | ALL PURPOSE FLUORESCENT MARKER |
Fast dry | DRIES IN 5 MINUTES |
M & M-10 | MARKS ANNEALED,NORMALIZED HEAT TREATED SURFACES |
N | MARKS WILL NOT SHOW THROUGH TOP COAT |
O-10 | MARKS HEAVILY OILED SURFACES |
P | MARKS DO NOT DRY |
Quik-stik | FAST DRYING, LONG LASTING MARKS |
WS-38 | TEMPORARY MARKING |
Back to Top of Page
Cold Surface Paintstiks ® |
||||||||||||||||||||||||||||
B-E PAINTSTIK
® MARKER FOR MARKING VERY ROUGH SURFACES Size: 11/16" X 4-3/4" Marking range: -50°F to 150°F (-46°C to 66°C). |
|
|||||||||||||||||||||||||||
* Real paint in stick
form. * For marking forgings, castings, rough logs, lumber, concrete, and other rough surfaces. * Marks will withstand prolonged immersion in water. * Lead-free, non-toxic. * Long lasting, weather-resistant, fade-resistant. * Unit packaging: 12 of one color to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
|||||||||||||
BL PAINTSTIK
® MARKER BLEEDS THROUGH SOLVENT-BASED PAINTS Size: 11/16" X 4-3/4" Marking range: -50°F to 150°F (-46°C to 66°C). |
|
||||||||||||
* Real paint in stick
form. * Marks bleed through solvent or oil-based paints. * For fabricating structural steel, or layout work where the marks are required to bleed through a primer coat covering the marks. * To prevent bleeding through the finish coat, seal the marked areas with water-based epoxy paint. * For marking under water-based primers use the BL-W Paintstik®. * Unit packaging: 12 to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
|||||||||||||
BL-W PAINTSTIK
® MARKER BLEEDS THROUGH WATER-BASED PAINTS Size: 11/16" X 4-3/4" Marking range: -50°F to 150°F (-46°C to 66°C). |
|
||||||||||||
* Real paint in stick
form. * Marks bleed through water-based paints. * For fabricating structural steel or layout work where the marks are required to be seen through the primer coat covering the marks. * For marking under solvent or oil-based primers use the BL Paintstik®. * Unit packaging: 12 to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
||||||||||||||||||||||
C PAINTSTIK ®
MARKER FOR MARKING ON SMOOTH SURFACES Size: 11/16" X 4-3/4" Marking range: 0°F to 150°F (-18°C to 66°C). |
|
|||||||||||||||||||||
* Real paint in stick
form. * For marking on smooth surfaces such as: cold rolled steel, sheet metal, plate glass, and plastic. * Long-lasting, weather-resistant, fade-resistant. * Unit packaging: 12 of one color to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
||||||||||||||||||||||||||||||||||||||||||||
E PAINTSTIK ®
MARKER FOR HIGH VISIBILITY MARKS Size: 11/16" X 4-3/4" and 1" X 4-3/4" Marking range: -50°F to 150°F (-46°C to 66°C). |
|
|
||||||||||||||||||||||||||||||||||||||||||
* Real paint in stick
form. * High intensity colors. * For greater visibility in dimly lit areas. * For coding, identification, layout and fabricating work. * Long-lasting, weather-resistant, fade-resistant. * Available in regular and king size. * Unit packaging: 12 of one color to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
||||||||||||||||||||||||||||||||
F PAINTSTIK ®
FLUORESCENT MARKER ALL PURPOSE FLUORESCENT MARKER Size: 11/16" X 4-3/4" Marking range: -50°F to 150°F (-46°C to 66°C). |
|
|
||||||||||||||||||||||||||||||
* Real paint in stick
form. * Ultra high visibility fluorescent colors. * For marking metal, wood, glass, plastic, concrete, rubber, cardboard, and paper. * Marks through oil and water. * Ideal for layout, inspection, and color coding. * Unit packaging: 12 of one color to a box. |
Back to Top of Page
Cold Surface Paintstiks ® |
||||||||||||||||||||||||||||||||
FAST DRY PAINTSTIK
® MARKER DRIES IN 5 MINUTES Size: 11/16" X 4-3/4" & 3/8" X 4-1/4" Marking range: -50°F to 150°F (-46°C to 66°C). |
|
|
||||||||||||||||||||||||||||||
* Real paint in stick
form. * Marks dry in 5 minutes. * Ideal for marking in fabricating shops and assembly lines where immediate handling is necessary. * For marking metal, wood, glass, plastic, concrete, rubber, cardboard, and paper. * 3/8" size for marking smaller items. * Unit packaging: 12 of one color to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
|||||||||||||||||||||||||||||
M & M-10
PAINTSTIK ® MARKERS MARKS ANNEALED, NORMALIZED & HEAT TREATED SURFACES Size: 11/16" X 4-3/4" Mark at room temperature M withstands 1600°F (871°C). M-10 withstands 1800°F (982C). |
|
|
|||||||||||||||||||||||||||
* Real paint in stick
form. * Marks withstand annealing and heat treating operations. * For welds, ingots, castings, forgings, and annealed parts. * Will not come off in oil or water baths. * Unit packaging: 12 of one color to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
|||||||||||||||||||
N PAINTSTIK ®
MARKER MARKS WILL NOT SHOW THROUGH TOP COAT Size: 11/16" X 4-3/4" Marking range: 0°F to 150°F (-18°C to 66°C). |
|
||||||||||||||||||
* Real paint in stick
form, dries overnight. * Marks will not show through top coat of primer or finish layer of paint. * Ideal for shipbuilding or other metal fabrication that will be given a final coat of paint. * For marking metal, wood, glass, plastic, concrete, rubber, cardboard, and paper. * Unit packaging: 12 of one color to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
||||||||||
O-10 PAINTSTIK
® MARKER MARKS HEAVILY OILED SURFACES Size: 11/16" X 4-3/4" Marking range: 0°F to 250°F (-18°C to 121°C). |
|
|||||||||
* Real paint in stick
form, dries overnight. * For marking heavily oiled cold rolled steel and other oily surfaces. * Unit packaging: 12 to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
||||||||||
P PAINTSTIK ®
MARKER MARKS DO NOT DRY Size: 11/16" X 4-3/4" Marking range: -50°F to 150°F (-46°C to 66°C). |
|
|||||||||
* Real paint in stick
form, non-drying. * For marking steel prior to galvanizing process. * Marks are completely removed in the pickling bath and will not interfere with the galvanizing process. * Unit packaging: 12 to a box. |
Back to Top of Page
Cold Surface Paintstiks® |
|||||||||||||||||||
"WS 3/8""
PAINTSTIK ® MARKER" TEMPORARY MARKING Size: 3/8" X 4-1/4" Marking range: -50°F to 150°F (-46°C to 66°C). |
|
||||||||||||||||||
* Water soluble for easy
removal. * Smaller diameter for finer line marking. * Ideal for the temporary marking of plastics, glass, painted metal surfaces, polished aluminum, car bumpers, and exotic metals. * Unit packaging: 36 of one color to a box. |
Back to Top of Page
Cold Surface Paintstiks ® |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||
QUIK STIKTM
MARKER FAST DRYING, LONG LASTING MARKS Size: x" X x" Marking range: -50°F to 150°F (-46°C to 66°C). (2)Carded - 1 per card (3)Display box |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
|